Purepower aps 1050hv - audiophile current regenerator

PurePower APS 1050hv - Audiophile Current Regenerator

PurePower™ APS 1050hv is a sophisticated power conditioner and stabilizer capable of autonomously regenerating electric current, filtering, purifying and regenerating a perfectly sinusoidal wave. In the event of a BlackOut, thanks to its internal batteries, it can continue to power the connected components for about 10 minutes under maximum load conditions (24 minutes under 50% load).The autonomy can be further increased by adding PowerPacks, additional battery packs that can provide up to 8 hours of autonomy in total power failure.

At PurePower, we firmly believe that music playback should not stop suddenly, that watching a movie should not be disturbed by flickering and image instability, and that the recording you are making should not be interrupted because of a momentary power failure or a complete blackout.

We believe that current problems such as fluctuations brought about by a sudden increase in intensity, voltage spikes, transients, and harmonic distortions should never catastrophically and irreparably damage or destroy the expensive components of a Hi-Fi or Home Teather system or cause it to slowly deteriorate due to periodic overheating of internal components. Yet, unfortunately, all of this can happen if we do not adopt a device that can protect our valuable audio-video components from these events that can be the order of the day.

If you have spent the time, money and effort to assemble and build a set of components that can assure you of a high level of audio-video performance, make sure that these components can tap into a clean, pure and, above all, uninterrupted power source so that they can always perform at their peak.

Pure Input Power > Pure Output Sound

The PurePower™ APS provides truly regenerated power even if your electrical system has problems.

This extraordinary result is achieved through sophisticated double conversion technology. The incoming alternating current (AC) is converted by the PurePower™ APS into totally clean and purified direct current (DC), at which point a new, stable 50 or 60 Hz AC current is recreated and regenerated, with a perfectly sinusoidal waveform.

No overvoltage, undervoltage, fluctuation, electrical discharge or other power line disturbances will be able to pass from the input of the PurePower™ APS to its outputs.

Not only that! In the event of a total Black Out you will have plenty of time to be able to properly power down your electronics, which is especially important for Projectors. The very expensive lamps mounted inside the Projectors, in fact, require a proper cooling procedure at the time of shutdown. In the event of a Black Out, this procedure could not be performed properly, because the projector would immediately shut down, which would cause irreparable lamp failure.

Voltage Accurate to prevent power reductions.

Some products designed to clean and filter the power supply can reduce the current going to your amplifications. The PurePower™ APS is able to maintain its voltage with an energy efficiency of 92% with a delivered power factor greater than .95. Thanks to the sophisticated technological solutions adopted, all our APS models are capable of conveying their full nameplate wattage even during short- or long-term current fluctuations and sags. In fact, our APSs are able to continuously supply and deliver full nameplate wattage even during long periods of low voltage in your electrical system.





Pure Current Continuity.

In addition to delivering absolutely clean current, the PurePower™ APS provides something unique and exclusive among audio current regenerators and that is protection against blackouts. The PurePower™ APS maintains full current delivery even when power is completely missing from your electrical system. All models of the PurePower™ APS guarantee you, even in the total absence of input power, absolute continuity of purest, full-rate, quality power for a period of time ranging from a few minutes to several hours, depending on the power draw of your components (the duration can be increased considerably by adding additional and optional PowerPacks). You can add and stack up to four additional and optional PurePower™ Power Packs, which will ensure several hours of purest power even when your neighbors are completely in the dark.







PUREPOWER™ 1050hv TECHNICAL SPECIFICATIONS:

Line Input

• Nominal Voltage: 230 Vac
• Voltage Range: 160-288 VAC
• Frequency: 50 / 60 Hz Automatic Detection
• Extra connections for 1050hv: IEC 320-C13 model tubing ( 8 amp)

PurePower™ Outputs

• Output Voltage: 230 Vac
• Power Tolerance: ±3% of rated power
• Frequency Tolerance: ±.1 Hz
• Efficiency: 89-92% dependent on load
• 1050hv power outlets: 4 Schuko outlets, plus 1 IEC 320 to connect external auxiliary outlets (power strip)

Physical Characteristics

• Form: Shelf component, also installable in Rack (brackets provided)
• Dimensions (H x W x D) 1050hv: 89 x 432 x 494 mm
• Environmental and Safety
• Safety Markings: CE & UL 1778
• EMC: EN 50091-2, EN6100-3-2
• Safety Standards: EN 50091-1
• Operating Temperature: 32 - 90- F (0 - 30-C)
• Noise Level: <17 dBA
• Relative Humidity: 0 to 90% non-condensing

Additional Features

• Automatic Bypass: Automatic bypass of APS in case of overload or malfunction
• Diagnostics: Comprehensive self-diagnostics at power-on phase

Specifications

• Applicable Load: 1500Va / 1050 Watt continuous, 1500 Watt for a few minutes, 3150 Watt maximum peak (30 seconds). 6 amps RMS, 9 amps for short duration, 18 amps peak. Overloads beyond these periods result in bypass to standard power grid (only passive filters remain active). Normal operating mode is automatically restored the moment the surge ceases.